2012 Toyota Highlander

midsize SUV / 4-door SUV

2012 Toyota Highlander 4-door SUV
2008 Toyota Highlander shown

Crashworthiness

Rating overview
Evaluation criteria Rating
Moderate overlap front: original test
G
Side: original test
G
Roof strength
G
Head restraints & seats
G

Key

GGood
AAcceptable
MMarginal
PPoor
Superior
Advanced
Basic

Some ratings use a scale of Poor to Good. Others range from Basic to Superior.

Moderate overlap front: original test

Tested vehicle: 2008 Toyota Highlander Limited 4-door 4wd
Rating applies to 2008-13 models

The Toyota Highlander was redesigned for the 2008 model year. Frontal ratings are assigned by the Institute based on a test conducted by Toyota.

Evaluation criteria Rating
Overall evaluation
G
Structure and safety cage
G
Driver injury measures
Head/neck
A
Chest
G
Leg/foot, left
G
Leg/foot, right
G
Driver restraints and dummy kinematics
G
Technical measurements for this test

Measures of occupant compartment intrusion on driver side

Evaluation criteria Measurement
Test ID VTF0708
Footwell intrusion
Footrest (cm) 8
Left (cm) 8
Center (cm) 9
Right (cm) 7
Brake pedal (cm) 3
Instrument panel rearward movement
Left (cm) 2
Right (cm) 2
Steering column movement
Upward (cm) -4
Rearward (cm) -2
A-pillar rearward movement (cm) 1

Driver injury measures

Evaluation criteria Measurement
Test ID VTF0708
Head
HIC-15 217
Peak gs at hard contact 77
Neck
Tension (kN) 1.6
Extension bending moment (Nm) 34
Maximum Nij 0.29
Chest maximum compression (mm) 34
Legs
Femur force - left (kN) 1.7
Femur force - right (kN) 2.5
Knee displacement - left (mm) 3
Knee displacement - right (mm) 3
Maximum tibia index - left 0.53
Maximum tibia index - right 0.40
Tibia axial force - left (kN) 2.6
Tibia axial force - right (kN) 2.4
Foot acceleration (g)
Left 95
Right 50

About the original moderate overlap front test

Side: original test

Tested vehicle: 2008 Toyota Highlander 4-door 4wd with head curtain airbags for all three rows of seats and front seat-mounted torso airbags
Rating applies to 2008-13 models

The Toyota Highlander was redesigned for the 2008 model year.

Evaluation criteria Rating
Overall evaluation
G
Structure and safety cage
G
Driver injury measures
Head/neck
G
Torso
G
Pelvis/leg
G
Driver head protection
G
Rear passenger injury measures
Head/neck
G
Torso
G
Pelvis/leg
G
Rear passenger head protection
G
Technical measurements for this test

Measures of occupant compartment intrusion on driver side

Test ID CES0737
B-pillar to longitudinal centerline of driver's seat (cm) -17.0
Negative numbers indicate the amount by which the crush stopped short of the seat centerline.

Driver injury measures

Evaluation criteria Measurement
Test ID CES0737
Head HIC-15 129
Neck
Tension (kN) 0.8
Compression (kN) 0.0
Shoulder
Lateral deflection (mm) 45
Lateral force (kN) 1.5
Torso
Maximum deflection (mm) 36
Average deflection (mm) 25
Maximum deflection rate (m/s) 3.99
Maximum viscous criterion (m/s) 0.71
Pelvis
Iliac force (kN) 0.9
Acetabulum force (kN) 2.2
Combined force (kN) 2.9
Left femur
L-M force (kN) 0.2
L-M moment (Nm) 38
A-P moment (Nm) -34

Passenger injury measures

Evaluation criteria Measurement
Test ID CES0737
Head HIC-15 64
Neck
Tension (kN) 0.1
Compression (kN) 0.6
Shoulder
Lateral deflection (mm) 32
Lateral force (kN) 1.6
Torso
Maximum deflection (mm) 19
Average deflection (mm) 14
Maximum deflection rate (m/s) 1.77
Maximum viscous criterion (m/s) 0.15
Pelvis
Iliac force (kN) 0.6
Acetabulum force (kN) 2.9
Combined force (kN) 3.0
Left femur
L-M force (kN) 0.6
L-M moment (Nm) 65
A-P moment (Nm) 31

About the original side crash test

Roof strength

Tested vehicle: 2010 Toyota Highlander 4-door 4wd
Rating applies to 2008-13 models

Overall evaluation
G
Curb weight 4,325 lbs
Peak force 20,511 lbs
Strength-to-weight ratio 4.74

About the roof strength test

Head restraints & seats

Seat type: Manual cloth seats AHR

Overall evaluation
G
Dynamic rating
G
Seat/head restraint geometry
G
Technical measurements for this test
Seat type Manual cloth seats AHR
Geometry
Backset (mm) 38
Distance below top of head (mm) 42
Seat design parameters
Pass/fail Pass
Max T1 acceleration (g) 12.6
Head contact time (ms) 65
Force rating 1
Neck forces
Max neck shear force (N) 1
Max neck tension (N) 487

About the head restraint & seat test
Currently, IIHS tests apply only to front seats.