2007 BMW X3

midsize luxury SUV / 4-door SUV

Crashworthiness

Rating overview
Moderate overlap front: original test
Head restraints & seats

Other available safety features

  • Standard daytime running lights

Key

  • G
    Good
  • A
    Acceptable
  • M
    Marginal
  • P
    Poor
  • Superior
  • Advanced
  • Basic

Some ratings use a scale of Poor to Good. Others range from Basic to Superior.

Moderate overlap front: original test

Rating applies to 2004-10 models

Tested vehicle: 2008 BMW X3 3.0si 4-door 4wd

The BMW X3 was introduced in the 2004 model year.

Overall evaluation
Structure and safety cage
Driver injury measures
Head/neck
Chest
Leg/foot, left
Leg/foot, right
Driver restraints and dummy kinematics

Action shot taken during the frontal offset crash test.

The dummy's position in relation to the steering wheel and instrument panel after the crash test indicates that the driver's survival space was maintained very well.

Smeared greasepaint indicates where the dummy's head brushed across the side curtain airbag during rebound.

Intrusion into the driver's space was minimal, and all leg and foot injury measures were low.

Technical measurements for this test

Measures of occupant compartment intrusion on driver side

Test ID CEF0722
Footwell intrusion
Footrest (cm) 8
Left (cm) 6
Center (cm) 5
Right (cm) 5
Brake pedal (cm) 3
Instrument panel rearward movement
Left (cm) 1
Right (cm) 2
Steering column movement
Upward (cm) 7
Rearward (cm) -1
A-pillar rearward movement (cm) 1

Driver injury measures

Test ID CEF0722
Head
HIC-15 539
Peak gs at hard contact no contact
Neck
Tension (kN) 1.2
Extension bending moment (Nm) 18
Maximum Nij 0.31
Chest maximum compression (mm) 42
Legs
Femur force - left (kN) 0.7
Femur force - right (kN) 1.4
Knee displacement - left (mm) 0
Knee displacement - right (mm) 0
Maximum tibia index - left 0.45
Maximum tibia index - right 0.32
Tibia axial force - left (kN) 2.0
Tibia axial force - right (kN) 1.9
Foot acceleration (g)
Left 63
Right 51

How the moderate overlap front test is conducted

Head restraints & seats

Seat type: Seats with adjustable lumbar

Overall evaluation
Dynamic rating
Seat/head restraint geometry
Technical measurements for this test
Seat type Seats with adjustable lumbar
Geometry
Backset (mm) 48
Distance below top of head (mm) 62
Seat design parameters
Pass/fail Fail
Max T1 acceleration (g) 11.9
Head contact time (ms) 98
Force rating 3
Neck forces
Max neck shear force (N) 316
Max neck tension (N) 965

How the head restraint & seat test is conducted
Currently, IIHS tests apply only to front seats.