2007 Audi A3

midsize car / 4-door wagon

2007 Audi A3 4-door wagon
2006 Audi A3 4-door wagon shown

Crashworthiness

Rating overview
Moderate overlap front
Side
Roof strength
Head restraints & seats

Key

  • G
    Good
  • A
    Acceptable
  • M
    Marginal
  • P
    Poor
  • Superior
  • Advanced
  • Basic

Some ratings use a scale of Poor to Good. Others range from Basic to Superior.

Moderate overlap front

Rating applies to 2006-13 models

Tested vehicle: 2006 Audi A3 2.0T wagon

The Audi A3 was introduced in the 2006 model year.

Overall evaluation
Structure and safety cage
Driver injury measures
Head/neck
Chest
Leg/foot, left
Leg/foot, right
Driver restraints and dummy kinematics

Action shot taken during the frontal offset crash test.

The dummy's position in relation to the steering wheel and instrument panel after the crash test indicates that the driver's survival space was maintained well.

Smeared greasepaint above the dummy's head indicates where the head hit the roof rail during rebound. Head acceleration from this hit was low.

Intrusion into the driver's space was minimal (shown with carpeting removed).

Technical measurements for this test

Measures of occupant compartment intrusion on driver side

Test ID CEF0528
Footwell intrusion
Footrest (cm) 7
Left (cm) 10
Center (cm) 7
Right (cm) 4
Brake pedal (cm) 6
Instrument panel rearward movement
Left (cm) 0
Right (cm) 0
Steering column movement
Upward (cm) 0
Rearward (cm) -1
A-pillar rearward movement (cm) 1

Driver injury measures

Test ID CEF0528
Head
HIC-15 365
Peak gs at hard contact 37
Neck
Tension (kN) 1.6
Extension bending moment (Nm) 13
Maximum Nij 0.37
Chest maximum compression (mm) 32
Legs
Femur force - left (kN) 3.4
Femur force - right (kN) 3.0
Knee displacement - left (mm) 0
Knee displacement - right (mm) 4
Maximum tibia index - left 0.41
Maximum tibia index - right 0.97
Tibia axial force - left (kN) 1.8
Tibia axial force - right (kN) 4.2
Foot acceleration (g)
Left 56
Right 139

How the moderate overlap front test is conducted

Side

Rating applies to 2006-13 models

Tested vehicle: 2006 Audi A3 2.0T wagon with standard front and rear head curtain airbags and standard front seat-mounted torso airbags

The Audi A3 was introduced in the 2006 model year.

Overall evaluation
Structure and safety cage
Driver injury measures
Head/neck
Torso
Pelvis/leg
Driver head protection
Rear passenger injury measures
Head/neck
Torso
Pelvis/leg
Rear passenger head protection

View of the vehicle and barrier just after the crash test.

View of the vehicle after the crash with doors removed, showing the side airbags and damage to the occupant compartment.

Action shot taken during the side impact crash test showing the driver dummy's head was protected from being hit by hard structures by the side curtain airbag.

Smeared greasepaint shows where the rear passenger dummy’s head was protected by the side airbag.

Technical measurements for this test

Measures of occupant compartment intrusion on driver side

Test ID CES0525
B-pillar to longitudinal centerline of driver's seat (cm) -13.0
Negative numbers indicate the amount by which the crush stopped short of the seat centerline.

Driver injury measures

Test ID CES0525
Head HIC-15 300
Neck
Tension (kN)
Compression (kN)
Shoulder
Lateral deflection (mm) 41
Lateral force (kN) 1.8
Torso
Maximum deflection (mm) 31
Average deflection (mm) 29
Maximum deflection rate (m/s) 3.46
Maximum viscous criterion (m/s) 0.44
Pelvis
Iliac force (kN) 1.6
Acetabulum force (kN) 2.0
Combined force (kN) 3.4
Left femur
L-M force (kN) 0.2
L-M moment (Nm) 55
A-P moment (Nm) 19

Passenger injury measures

Test ID CES0525
Head HIC-15 146
Neck
Tension (kN) 0.3
Compression (kN) 0.2
Shoulder
Lateral deflection (mm) 42
Lateral force (kN) 2.0
Torso
Maximum deflection (mm) 31
Average deflection (mm) 28
Maximum deflection rate (m/s) 2.59
Maximum viscous criterion (m/s) 0.33
Pelvis
Iliac force (kN) 0.3
Acetabulum force (kN) 2.9
Combined force (kN) 3.1
Left femur
L-M force (kN) 0.4
L-M moment (Nm) 48
A-P moment (Nm) -28

How the side crash test is conducted

Roof strength

Rating applies to 2006-13 models

Tested vehicle: 2009 Audi A3 2.0 TFSI wagon

Overall evaluation
Curb weight 3,224 lbs
Peak force 13,429 lbs
Strength-to-weight ratio 4.17

How the roof strength test is conducted

Head restraints & seats

Seat type: Manual cloth seats AHR

Overall evaluation
Dynamic rating
Seat/head restraint geometry
Technical measurements for this test
Seat type Manual cloth seats AHR
Geometry
Backset (mm) 40
Distance below top of head (mm) 50
Seat design parameters
Pass/fail Pass
Max T1 acceleration (g) 13.2
Head contact time (ms) 67
Force rating 2
Neck forces
Max neck shear force (N) 204
Max neck tension (N) 806

How the head restraint & seat test is conducted